FREE !!! Multi Grip Chin Up / Pull Up Bars... - Ausbb

**The Hulk** · 22-07-2010, 12:23 AM

We got a bad batch of chin up bars a while back.
They weren't chromed properly so had to be replaced.
There are some rust stains seeping through, only cosmetic, not structural.
Right now, they are just taking up space in the warehouse.
Someone might as well make use out of them.
You can bolt it somewhere, maybe an existing rack, or suspend it from overhead with cables or chains.

Same chin up bar from this rack:
MMPR Power Rack

The deal is:
Free if you come to pick up (limit of one per person).
Don't want to deliver, but will do so for cost (depending on destination) + $10 handling/administration fee.

Address if you want it is on website: www.gymdirect.com.au

robbo14 · 10-10-2010, 10:05 AM

Exactly what i need, Can you post it to 5023 SA, I will cover all cost of course

PRISON_MIKE · 10-10-2010, 02:18 PM

Can you post some photos of what they look like?

Also, the exact length of them pls?

eaglebay · 10-10-2010, 09:06 PM

110.4 cm

PRISON_MIKE · 11-10-2010, 07:47 PM

Thanks for the measurement, altough, I was looking for a photo of The_hulk's pullup bar so I can see how much damage it has.

**The Hulk** · 12-10-2010, 01:40 PM

Quote:

Originally Posted by robbo14

Exactly what i need, Can you post it to 5023 SA, I will cover all cost of course

email or message me your:

Name
Delivery Address
Phone number
email address (if sending PM)

And I'll send you an invoice for delivery/associated costs.

Thanks

**The Hulk** · 12-10-2010, 01:44 PM

Quote:

Originally Posted by PRISON_MIKE

Thanks for the measurement, altough, I was looking for a photo of The_hulk's pullup bar so I can see how much damage it has.

There are many available.
They all vary in appearance.
Some just have slight discolouration in a couple of spots, like a light stain.
Not structural rust.

Grippy · 12-10-2010, 05:21 PM

Could I grab a postage cost thanks mate, Greenwith SA 5125.
Will make a good replacement for the straight one on my power rack.

dy-lon · 16-10-2010, 10:57 PM

Is this compatible with the BPR01 power rack?

Alpha Moth · 17-10-2010, 05:22 PM

How much to deliver to newcastle? would be useful to have a back up

22-07-2010, 12:23 AM	#1 (permalink)
The Hulk Active Member Site Advertiser Join Date: Jun 2008 Location: Sydney Gender: Posts: 2,092	FREE !!! Multi Grip Chin Up / Pull Up Bars... We got a bad batch of chin up bars a while back. They weren't chromed properly so had to be replaced. There are some rust stains seeping through, only cosmetic, not structural. Right now, they are just taking up space in the warehouse. Someone might as well make use out of them. You can bolt it somewhere, maybe an existing rack, or suspend it from overhead with cables or chains. Same chin up bar from this rack: MMPR Power Rack The deal is: Free if you come to pick up (limit of one per person). Don't want to deliver, but will do so for cost (depending on destination) + $10 handling/administration fee. Address if you want it is on website: www.gymdirect.com.au

10-10-2010, 02:18 PM	#3 (permalink)
PRISON_MIKE Senior Member Join Date: Aug 2009 Location: Brisvegas Gender: Posts: 260	Can you post some photos of what they look like? Also, the exact length of them pls? Last edited by PRISON_MIKE; 10-10-2010 at 02:27 PM.

10-10-2010, 09:06 PM	#4 (permalink)
eaglebay Elite Member Join Date: Oct 2009 Location: Perth Gender: Posts: 862	110.4 cm __________________

10-10-2010, 10:05 AM	#2 (permalink)
robbo14 Member Join Date: Oct 2010 Gender: Posts: 80	Exactly what i need, Can you post it to 5023 SA, I will cover all cost of course

11-10-2010, 07:47 PM	#5 (permalink)
PRISON_MIKE Senior Member Join Date: Aug 2009 Location: Brisvegas Gender: Posts: 260	Thanks for the measurement, altough, I was looking for a photo of The_hulk's pullup bar so I can see how much damage it has.

12-10-2010, 05:21 PM	#8 (permalink)
Grippy Active Member Join Date: Nov 2009 Location: Adelaide Gender: Posts: 1,303	Could I grab a postage cost thanks mate, Greenwith SA 5125. Will make a good replacement for the straight one on my power rack.

16-10-2010, 10:57 PM	#9 (permalink)
dy-lon Newbie Join Date: Sep 2010 Gender: Posts: 13	Is this compatible with the BPR01 power rack?

17-10-2010, 05:22 PM	#10 (permalink)
Alpha Moth Super Member Join Date: Nov 2009 Location: Newcastle Gender: Posts: 512	How much to deliver to newcastle? would be useful to have a back up