• Keep up to date with Ausbb via Twitter and Facebook. Please add us!
  • Join the Ausbb - Australian BodyBuilding forum

    If you have any problems with the registration process or your account login, please contact contact us.

    The Ausbb - Australian BodyBuilding forum is dedicated to no nonsense muscle and strength building. If you need advice that works, you have come to the right place. This forum focuses on building strength and muscle using the basics. You will also find that the Ausbb- Australian Bodybuilding Forum stresses encouragement and respect. Trolls and name calling are not allowed here. No matter what your personal goals are, you will be given effective advice that produces results.

    Please consider registering. It takes 30 seconds, and will allow you to get the most out of the forum.

[Cycling] Rear Brake problem!

B

brutus

Guest
hey guys and gals :)

just got new pads,cables and bleeding done to the rear brake on my bike took it out for a spin my bike and noticed that the rear brake had little to no stopping power at average speed

do the new pads need to be worn inare not worn in? any help suggestions would be great
 
new pads have stuff all stopping power , they need to be worn in first
Try going down a hill and putting on the anchors hard at the bottom. Repeat a few times.
 
trail said:
Try going down a hill and putting on the anchors hard at the bottom. Repeat a few times.
Click to expand...

to help speed up the process , it might help to wet the brake caliper and rotor before you try the above mentioned process
 
You must log in or register to reply here.
Top